Daiwa Hanbai Corporation Ltd.|Portable level gauging (Honeywell Enraf Tanksystem)

Portable level gauging (Honeywell Enraf Tanksystem)

Portable level gauging (Honeywell Enraf Tanksystem)

Features

The portable level gauging is a device, which can measure oil/water interface, temperature and measure through the vapor lock valve fitting. The portable gauging type devices are available for either open, restricted or closed gauging applications.
The sensing probe includes an ultrasonic liquid level sensor, a temperature sensor and conductivity electrode. The sensitivity for ullage and interface measurement does not require any adjustment. The portable level gauging devises are type approved by all major classification societies.

HERMetic UTImeter Gtex (Chem)

>HERMetic UTImeter Gtex (Chem) Zoom

The HERMetic UTImeter Gtex is a portable gas tight liquid level gauge designed for closed gauging of hydrocarbons and chemicals. The unit is used for cargo Inspection, custody transfer, temperature measurement, free water detection and verification of fixed installed level gauging systems. Connected to a 1” or 2” HERMetic vapour control valve fixed installed on deck, the HERMetic UTImeter Gtex avoids any gas release during operation.
HERMetic UTImeter Rtex

>HERMetic UTImeter Rtex Zoom

The HERMetic UTImeter Rtex is a portable liquid level gauge designed for restricted gauging of petroleum products. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. The HERMetic UTImeter Rtex has to be connected to a 1” or 2” HERMetic vapour control valve fixed on the tank.

Portable samplers (Honeywell Enraf Tanksystem)

HERMetic Sampler GTX Chem

>HERMetic Sampler GTX Chem Zoom

The HERMetic samplerGTX Chem are designed for closed sampling of liquids or chemicals, which present a fire, health or air pollution hazard. The gas tight construction of these units avoids a pressure release from the tank and exposure to fumes during operation.
For the HERMetic samplerGTX Chem the transfer of the liquid from the sampling bottle to a laboratory bottle occurs by over pressuring the upper chamber of the sampler with a pump. Depending on the need, the sampling bottles comes in four versions of approximately 0.5l, suited for 2” vapor control valves.
The HERMetic Sampler GTX Chem is very easy to clean and fully compatible with all kind of non-corrosive and corrosive liquids.
HERMetic Sampler GTN Chem

>HERMetic Sampler GTN Chem Zoom

For the HERMetic Sampler GTN Chem, the sample can be transferred under closed condition. This transfer guarantees the integrity of the sample, since the liquid is never in contact with the atmosphere. A closed vapour recovery system dispatches the vapours back into the tank during transfer of the liquid into the laboratory bottle. The HERMetic Sampler GTN Chem can be purged with inert gas before and/or after sampling, the sampled liquid is never in contact with the atmosphere and the sampling height can be measured on the graduated tape.
Depending on the need, the sampling bottles comes in four versions of approximately 0.5l, suited for 2” vapor control valves.
HERMetic Sampler A-4

>HERMetic Sampler A-4 Zoom

The HERMetic Sampler A-4 is an large volume sampler where more than 0.5l is needed. The HERMetic Sampler A-4 is designed for restricted sampling and the sampler housing is mounted on top of the HERMetic 4 Inch deck valve. Depending on the need, the sampling bottles comes in four versions of approximately 1.8l, suited for 4” vapor control valves.
HERMetic Sampler GT-4

>HERMetic Sampler GT-4 Zoom

The HERMetic Sampler GT-4 is designed for closed, gas tight sampling of liquids which presents fire, health or air pollution hazards.
The The HERMetic Sampler GT-4 is dedicated for closed sampling of liquids and when more than 0.5 litres is needed. Its gas tight construction avoids a pressure release from the tank and exposure to fumes during operation. Depending on the need, the sampling bottles comes in four versions of approximately 1.8l, suited for 4” vapor control valves.
HERMetic Sampler A-2

>HERMetic Sampler A-2 Zoom

The HERMetic Sampler A-2 is dedicated to applications where restricted sampling is accepted. The sampler A-2 is for connection to 2” HERMetic vapour control valves. The liquid transfer from the sampling bottle to the laboratory bottle occurs under open conditions after closing the vapor control valve. Depending on the need, the sampling bottles come in four versions of approximately 0.5l.
HERMetic Sampler A-1

>HERMetic Sampler A-1 Zoom

The HERMetic Sampler A-1 is dedicated to applications where restricted sampling is accepted. The sampler A-1 is for connection to 1” HERMetic vapour control valves. The liquid transfer from the sampling bottle to the laboratory bottle occurs under open conditions after closing the vapor control valve. Depending on the need, the sampling bottles come in four versions of approximately 0.3l.
HERMetic Sampler GT-1

>HERMetic Sampler GT-1 Zoom

The HERMetic Sampler GT-1 is fitted with a gas tight housing designed for closed sampling of liquids, which present a fire, health or air pollution hazard. It protects the storage facility from vapor emission and avoids a pressure release in the tank during sampling. The sampling height can be measured on the graduated tape. Depending on the need, the sampling bottles comes in four versions of approximately 0.3l, suited for 1” vapor control valves.

Accessories (Honeywell Enraf Tanksystem)

HERMetic DIP 2 & DIP2 GT

>HERMetic DIP 2 & DIP2 GT Zoom

A 500 mm long graduated DIP rod, designed for easy penetration of sediments on tank bottom, is attached to a 30m long stainless steel tape, which is coiled on a graduated reel, in combined metric and English unit. The storage tube is fitted with a quick connect coupling for fast and easy installation on all 1 Inch quick connect nipples.
The HERMetic DIP 2 is also available in closed, gas tight version. The gas tight construction of this unit avoids a pressure release from the tank and exposure to toxic fumes during operation.

HERMetic OXY

>HERMetic OXY Zoom

As per IMO requirement on Tanker Safety and Pollution Prevention, oxygen level shall be determined before start of crude oil washing. The HERMetic OXY samples inert gas (or any other gas) over full tank height without escape of gas to the atmosphere. Hollow brass plug fitted to the rubber hose of up to 30 meters length. Valve provided on hose before gas analyser ( analyser not supplied ) for air purging of hose. HERMetic OXY adapts to all 1 Inch quick connect nipples.

HERMetic Press

>HERMetic Press Zoom

Tanker operation requires verification of tank pressure without potential for error due to signal conversion or remote transmission. This rugged high precision gauge provides reliable reading within the range of 1500 mm vacuum and 2500 mm pressure. Gauge is protected by thick rubber rim and mounted on top of vapour tight adaptor for closed tank operation. Quick connect coupling lower end for use with all 1 Inch quick connect nipples.

Vapor Lock Valve (Honeywell Enraf Tanksystem)

HERMetic Compact Valve C1-SS-W

>HERMetic Compact Valve C1-SS-W Zoom

1inch full bore ball valve with 1 inch male BSP pipethread designed to support all portable HERMetic equipment with HERMetic 1inch quick connector.
HERMetic Compact Valve C1-SS-P

>HERMetic Compact Valve C1-SS-P Zoom

1inch valve fitted with a special pressure cap cover. This cover is specially designed for use with hazardous chemicals and protect against inadvertent opening.
HERMetic Compact Valve A-4 SS

>HERMetic Compact Valve A-4 SS Zoom

Specially designed heavy-duty compact ball valve made of stainless steel 316 and with FFKM gaskets. The deck flange is according to ANSI 150 lbs. standards. This 4-inch deck valve is provided with a swing away cover fitted with a 1 inch quick-connect male coupling. This coupling takes all HERMetic equipment fitted with a 1 inch female quick connector. For sampling, open the cover and install the HERMetic Sampler A-4 or Sampler GT4 on top of the valve. Three wing nuts are used to secure the cover or alternatively the sampler chamber.
HERMetic Compact Valve C2-SS-BL

>HERMetic Compact Valve C2-SS-BL Zoom

2 inch full bore ball valve made of corrosion resistant stainless steel with high Molybdenum content. The top part is designed to support HERMetic equipment with 2 inch quick connector and flange connection.
Weight: 4.8kg
HERMetic Compact Valve C2-SS-BL Female

>HERMetic Compact Valve C2-SS-BL Female Zoom

2 inch full bore ball valve made of corrosion resistant stainless steel with high Molybdenum content. The top part is designed to support HERMetic equipment with 2 inch quick connector and with 2 inch female thread.
HERMetic Compact Valve C2-SS-W

>HERMetic Compact Valve C2-SS-W Zoom

Same valve as HERMetic Compact valve C2-SS-BL except the cover, which is fitted with a 1 inch quick-connect nipple identical to the one supplied on the smaller C1-SS-W Compact valve and with flange connection. This nipple matches all HERMetic units and accessories with 1 inch connections. The complete cover can be removed for connection of equipment with 2 inch connector.
Weight 5.4kg
HERMetic Compact Valve C2-SS-W Female

>HERMetic Compact Valve C2-SS-W Female Zoom

Same valve as HERMetic Compact valve C2-SS-BL except the cover, which is fitted with a 1 inch quick-connect nipple identical to the one supplied on the smaller C1-SS-W Compact valve and with female 2” thread connection. This nipple matches all HERMetic units and accessories with 1 inch connections. The complete cover can be removed for connection of equipment with 2 inch connector.
HERMetic Compact Valve C2-SS-SEC

>HERMetic Compact Valve C2-SS-SEC Zoom

Same valve as HERMetic Compact valve C2-SS-BL except a patented double-locked security cover which prevents any water ingress and protects against inadvertent openings. The cover is secured to the valve with a stainless steel cable and have flange connections. Specially designed for hazardous chemicals.
Weight: 4.8kg
HERMetic Compact Valve C2-SS-SEC Female

>HERMetic Compact Valve C2-SS-SEC Female Zoom

Same valve as HERMetic Compact valve C2-SS-BL except a patented double-locked security cover which prevents any water ingress and protects against inadvertent openings. The cover is secured to the valve with a stainless steel cable and have 2” female connection. Specially designed for hazardous chemicals.
Weight: 4.8kg
Top of page